Description
This genuine .75HP (3/4HP) replacement impeller is engineered specifically for Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End configurations with .75HP motors drawing approximately 7.0 Amps on High Speed at 230V and 7-8.0 Amps at 115V. Positioned between the Face and Volute of your Aqua-Flo FMHP, FMCP, FMVP, and TMCP Series Wet End, this impeller ensures optimal water flow. We strongly recommend replacing the Seal simultaneously with impeller replacement. Compatible seal: PS-200 / HTP35-423-1020, available through Global. Please verify compatibility carefully – all sales are final. Reference the amperage chart below to confirm horsepower ratings. Identifying 48 Frame vs 56 Frame: 48 Frame motor thru bolts measure 3 5/8″ spacing or 5 3/16″ in X Pattern with 1/4″ Bolt Head; 56 Frame measures 4 1/8″ spacing or 5 3/4″ in X Pattern with 5/16″ Bolt Head.
Impeller back marking number: SBH93551
Compatible PS-200 Seals available at Global.
Reference Note: A 115v motor equipped with 1 HP Impeller typically draws 11-12.0 Amps on high speed; 230V motor draws approximately 8.0 Amps on High. Consult chart below for additional horsepower specifications.
